Collection: Pre-Order Prints

Items are for a screen print transfer.

Dimensions are approximately 11” wide.

Original formula ink.

Transfers are non-refundable.

Our screen print transfers must be pressed with a heat press.

We recommend following the below steps to ensure proper adhesion of our original formula / single color screen print transfers:

1. Set heat press to 325°
2. Pre-press the garment for 3-5 seconds
3. Place transfer (design side down) on the garment
4. Press for 7-10 seconds with heavy pressure
5. Peel while hot, but slowly to ensure complete adhesion.  If the plastisol ink is lifting, re-cover and re-press for another 7-10 seconds.

We recommend following the below steps to ensure proper adhesion of our high heat full color soft formula transfers:

1. Set heat press to 350° (NOTE: each press varies! Your press may need to be set as high as 375)
2. Pre-press the garment for 3-5 seconds
3. Place transfer (design side down) on the garment
4. Press for 7-10 seconds with heavy pressure
5. Peel while hot, but slowly to ensure complete adhesion.  If the plastisol ink is lifting, re-cover and re-press for another 7-10 seconds.